Standing Seam Metal Roofing · LockSeam
Clean vertical panels joined by raised seams, held by hidden clips that let the metal move with the heat. Suited to modern homes, ADUs and patio covers.
Metal roofing gives Southern California homes clean lines and a noncombustible surface that stands up to intense sun and heat. Our standing seam package is the LockSeam Metal System. We install standing seam roofs and repair metal roofs that leak, starting with a roofer-led inspection and a written scope.
For homes, the metal roof we install is standing seam, named for the raised seams that join its long vertical panels. The look is clean and linear, which suits modern and mid-century homes, and it works just as well on a new ADU, a porch roof or a patio cover. Metal can also be a smart change when an older roof is due for replacement, as long as the deck, slope and drainage are right for it. Here in Los Angeles and Orange County, any metal roof should be planned around hard sun, dry Santa Ana winds, winter storms and, near the beach, salt air.
Metal isn’t the right answer for every roof, and we’ll tell you if it isn’t right for yours. Our free roof evaluation starts there: a roofer checks your slope, the condition of the existing roof and how water leaves it, and tells you in plain English whether metal makes sense. If it does, we’ll walk you through standing seam metal roofing, from panel color to trims and flashings. Already have a metal roof that leaks? See metal roof repair. If you decide to go ahead, nothing starts until you’ve seen the written scope and price.
Pick the service that fits your project: a new standing seam roof, or a repair on the metal roof you have.

The panels themselves won’t burn, a real consideration for homes near brush, hillsides and canyons, where fire season can bring wind-driven embers.
Reflective finishes bounce back much of the sun’s heat, and metal won’t dry out or turn brittle under UV the way some roofing materials do with age.
Metal weighs far less than clay or concrete tile, and a well-installed metal roof asks for little upkeep beyond clear gutters and a periodic look at flashings and sealants.
Straight answers about metal roofing.
Usually, yes. Switching means a full tear-off, new underlayment, and trims and flashings made for metal. The deck gets a close look too, since the panels need a solid, flat surface underneath. If you’d rather keep the look you have, we’ll compare metal honestly with a tile roof replacement or shingle roof replacement.
Metal roofs are known for long service lives, but we won’t promise you a number of years. How long yours lasts depends on the metal and finish, how much sun and salt air it sees, and the quality of the installation. We focus on the part we control: careful work backed by our 10-year workmanship warranty.
It can, with the right choices. Salt air is hard on any metal, so homes near the water in places like Huntington Beach and Santa Monica need a panel metal, finish and fasteners chosen for that exposure. Cut edges, trims and flashings need careful detailing too, and we’ll go over coastal options before anything goes into your written scope.
Often, yes. Many metal roof leaks come from loose fasteners, worn sealant or flashing at walls and vents rather than from the panels themselves, and those can be repaired. See metal roof repair.
Yes. A roof evaluation on a metal roof looks at the seams, trims and flashings, the sealant around pipes and vents, any loose or backed-out fasteners and signs of corrosion. You get photos and a plain-English next step: repair, monitor, maintain or replace.
A few quick steps. A clear next step. No pressure.
What do you need help with?
Start My Free Roof Evaluation →Tell us what’s going on with your roof. A roofer, not a salesperson, looks at it and gives you a clear next step on metal roofing, with a written scope and price.